Find the most suitable 3D printer for your needs.
We guide you to find the best option according to your needs.
Find the most suitable 3D scanner for your needs.
Contact us and we'll get it for you.
Find the most suitable filament for each application.
Find the most suitable resin for each application.
Find the most suitable powder for each application.
Find the most suitable pellets for each application.
Find the accessory you need for your 3D printer.
Find the ideal accessories for your 3D prints.
Do you need more than 0 units? Please, contact us.
Product temporarily out of stock with these characteristics. Select another combination.
We notify you when it will be available:
CUREBox
CUREbox and CUREbox Plus are robust curing machines, made of high-quality materials and with easy and intuitive handling. Thanks to their characteristics, the CUREbox curing machines allow optimal curing of parts made with resin 3D printers.
The CUREbox has a large capacity curing chamber: 300 x 300 x 150 mm, allowing the curing of large pieces. The work surface is transparent, allowing UV rays to reach all the points of the piece, including the base.
The interior of the machine is lined with highly reflective panels that achieve a degree of reflectance of more than 98%. These panels are designed to work with specific wavelengths, providing efficient and uniform curing throughout the part.
Unlike other curing machines, CUREbox does not include a rotating base inside. Thanks to the high efficiency of the reflective panels inside, an optimal curing of the piece is achieved without the need to include this type of element.
Thanks to its touch screen (compatible with the use of gloves) and its presets, it's a very easy machine to use. The CUREbox has presets for the most commonly used Formlabs and NextDent brand resins.
To put it into operation, insert the part into the CUREbox, select the type of resin that has been used and press the "Run" button.
CUREbox is compatible with a wide range of resins of different technologies (SLA, DLP, LCD). In case of using a resin that is not collected within the presets, the custom configuration can be used, where the time and temperature values can be adjusted to adapt to the resin used in the manufacture of the piece.
Unlike other curing machines, CUREbox comes standard with UV light lamps with a wavelength of 365-405 nm simultaneously. Most of the resins on the market cure with a wavelength of 405 nm; however, there are some resins and glues that require a wavelength of 365nm. Thus, the 365-405 nm LED lights make it possible to work with a multitude of resins of different technologies (SLA, DLP, LCD).
LED lights in curing machines are the most prone item to failure. Furthermore, after a CUREbox usage of approximately 1000 hours, the LED lights may not work with the intensity necessary to cure resin parts optimally. To solve this problem, two replacement modules for lamp LED UV are available.
In this version of the CUREbox curing machine, the work surface is tempered glass, with even greater transparency and cleanliness than in the CUREbox.
In addition, the reflective panels inside are diffuse (matte). These panels offer the same degree of reflectance as in the CUREbox (more than 98%) but provide greater uniformity of cure to the piece.
Another modification with respect to the CUREbox is that CUREbox Plus can reach a temperature of up to 80 ºC, compared to 60 ºC that CUREbox reaches. Also, it can reach the selected temperature up to 4 times faster than CUREbox.
It's recommended that all users of a CUREbox curing machine take into account the following guidelines to ensure that the 3D printed parts maintain all the properties of the resin from which they are manufactured:
Regarding the cleaning of the CUREbox, it's recommended to use isopropyl alcohol (IPA).
CUREbox and CUREbox Plus are UV post-cure machines compatible with a wide variety of resins.