Wood Pellets
search
Compare
You must be logged in to manage your wishlist.

Wood pellets

PELLET-WOOD-WILLOW-1KG
18.95 € 18.95 €
Tax excl.
Format
Colour
Quantity

In stock 0 units available for immediate shipping.
units available for shipping in 2 - 4 days Available for shipment within 2 - 4 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Tuesday 17 September - Thursday 19 September
Available

PLA wood pellets are small cylinders composed of PLA and wood fibres. PLA (polylactic acid) is a biodegradable plastic obtained from natural resources such as starch extracted from corn, beet and wheat.

PLA is one of the most widely used materials in 3D printing today because it does not give off harmful gases and is easy to print.

Wood is composed of cellulose fibres bound with lignin. Wood is a very useful and versatile material, thanks to properties such as its strength, flexibility, hardness (which depends on the type of wood) and its good thermal and acoustic insulation capacity, thanks to the micro-bubbles of air that its structure contains when it is dry.

Wood is also an ecological material that comes from nature, which means that it is integrated into the environment with a much lower impact than other materials.

Wood has a great aesthetic value due to its colour and texture, which depend on the type of tree it comes from. This material can be manipulated and modified with techniques such as carving, and is widely used for artistic applications such as sculpture or polychromy.

For all these reasons, PLA wood pellets are a very useful material for the manufacture of aesthetic or decorative pieces, as well as for the creation of non-functional prototypes.

PLA wood pellets are of the highest quality and do not incorporate recycled or recovered material. Thanks to these qualities, PLA wood pellets are perfect for 3D printing, achieving high print quality. There are several methods for using pellets in 3D printing:

  • Wood PLA pellets can be used in the manufacture of filament for FDM 3D printers using Filastruder or any other filament extruder.
  • It is possible to use a pellet extruder to 3D print directly.

Piezas impresas con pellets PLA madera.

Image 1: Colours available in PLA wood pellets. Source: Smart materials.

With the combination of PLA Pellets and a good filament extruder such as Filastruder, it is possible to obtain 3D printing filament with qualities similar to those of a commercial wood PLA filament.

When using PLA Wood Pellets to make filament with a filament extruder such as Filastruder or using a pellet extruder for direct 3D printing, it should be noted that the extrusion temperature must be regulated in relation to the extrusion speed used. For optimal results, it is recommended to read the product's usage tips.

General information
Manufacturer Smart Materials
Material PLA
Format 1000 g / 5000 g
Density 1.58 g/cm³

Mechanical properties
Elongation at break - %
Tensile strength - MPa
Tensile modulus - MPa
Flexural strength - MPa
Flexural modulus - MPa
Surface hardness -

Electrical properties

Thermal properties
Melting temperature - ºC
Softening temperature - ºC
Processing temperature - ºC
MFR Ratio 28 g/10 min @ 220 °C/10.0 Kg
Glass transition temperature - ºC
Heat deflexion temperature - ºC

Specific properties

Other
HS Code 3901.1

The suitable temperature for extruding PLA wood pellets in the Filastruder is between 220 and 230ºC. For higher extrusion speeds, the temperature can be increased to 240°C, but in this case there is a risk of small air bubbles appearing in the filament.

With this material, the surface appearance can be varied by increasing the printing temperature. The higher the temperature, the darker the shades.

Due to the high amount of wood particles, clogging can occur in nozzles with a diameter of 0.4 mm. It is therefore recommended to use nozzles with an output diameter of more than 0.5 mm.

It is very important to store PLA wood pellets in an airtight bag to prevent them from absorbing moisture from the environment before use. If the pellets have moisture in them, the filament to be manufactured may contain small imperfections. Once the filament has been manufactured using PLA pellets, it is also recommended to store the filament in a dry place or in an airtight bag. This prevents the filament from absorbing moisture, thus obtaining better results during 3D printing.

Related products