PA6 Pellets
search
Compare
You must be logged in to manage your wishlist.

PA6 pellets

NANOVIA-PELLETS-PA6-500
16.90 € 16.90 €
Tax excl.
Format
Colour
Quantity

In stock 0 units available for immediate shipping.
units available for shipping in 11 - 16 days Available for shipment within 11 - 16 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Wednesday 11 December - Wednesday 18 December
Available

Polyamide 6 (PA6) is the most common extruded polyamide. It is known in industry for its good damping properties and impact resistance, as well as good toughness at low temperatures. It is ideal for bearings and gears, for example, as they would run quietly.

This material, developed by Nanovia, combines mechanical, thermal and chemical resistance.

PA6 pellets do not incorporate recycled or reclaimed material. Thanks to these qualities, PA6 pellets are perfect for 3D printing, achieving high print quality. There are several methods for using pellets in 3D printing:

  • PA6 pellets can be used in the manufacture of filament for FDM 3D printers using Filastruder or any other filament extruder.
  • It is possible to use a pellet extruder for 3D printing directly.

With the combination of PA6 pellets and a good filament extruder such as Filastruder, it is possible to obtain 3D printing filament with qualities similar to those of a commercial PA6 filament.

When using PA6 Pellets to make filament with a filament extruder such as Filastruder or using a pellet extruder for direct 3D printing, it should be noted that the extrusion temperature must be regulated in relation to the extrusion speed used.

PA6 pellets have a high sensitivity to humidity and should be kept in dry conditions (relative humidity of 20% or less) at all times. For optimal results, it is recommended to read the product usage advice.

PA6 pellets are designed for best results in 3D printing and is an ideal material for use in the automotive industry or for functional prototyping.

General information
Manufacturer Nanovia
Material PA
Format 1 kg / 10 kg
Density 1.14 g/cm³

Electrical properties

Mechanical properties
Elongation at break 50 %
Tensile strength 51 MPa
Tensile modulus 2100 MPa
Flexural strength 85 MPa
Flexural modulus 1650 MPa
Surface hardness -
Impact strength 5 KJ/m²

Thermal properties
Melting temperature - ºC
Processing temperature 240 - 260 ºC
MFR Ratio -
Glass transition temperature - ºC
Heat deflexion temperature - ºC

Specific properties
Flammability classification UL 94 HB @ 0.8 mm
Chemical resistance ✓

Other
HS Code 3901.1

When using PA6 pellets to make filament or as a material for direct 3D printing with a pellet extruder, it must be taken into account that it is a material with a certain difficulty in printing, due to the warping effect that it can generate.

PA6 is a very hygroscopic material, so it is advisable to store PA6 pellets in an airtight bag or use desiccant bags to prevent them from absorbing moisture. If the pellets have moisture in them, the filament that is manufactured may contain small imperfections that can negatively affect the final result.

Related products