Find the most suitable 3D printer for your needs.
We guide you to find the best option according to your needs.
Find the most suitable 3D scanner for your needs.
Contact us and we'll get it for you.
Find the most suitable filament for each application.
Find the most suitable resin for each application.
Find the most suitable powder for each application.
Find the most suitable pellets for each application.
Find the accessory you need for your 3D printer.
Find the ideal accessories for your 3D prints.
In contrast to FFF 3D printing, in resin 3D printing it is always advisable to use supports. There are several reasons why supports should be used, but the most important ones are:
In resin printing, the substrates are divided into three parts:
Although it may vary from one software to another, there are several parameters that must be set correctly for a successful printout:
Some of the most common failures in resin 3D printing are related to the supports.
Some manufacturers recommend removing the supports before post-curing, while others recommend removing them after post-curing. It is best to remove the supports before post-curing, as they will be easier to remove, and to go over the marks once the part has cured.
Supports should never be pulled off by hand, as this will cause notching and small gouges in the workpiece. Supports should always be removed using cutting pliers and blades, cutting close to the point of contact. Once the part has cured, they can be sanded to reduce their visual impact.
I have read and accept the privacy policy.