Spatula - BuildTak

BuildTak

New product

16 Items

22,95 €
22,95 €

Ask for information

Spatula to detach the parts of the base of the 3D printer comfortably and without damage.

BuildTak spatula is the new indispensable tool to take off the parts of the base of the 3D printer without damaging these same ones or to the own surface of print BuildTak.

To reduce the warping effect and 3D printed parts adhere to the base of the 3D printer most users usually use sheets BuildTak, 3DLac, Dimafix, Kapton Tape, Blue Tape, etc., fulfilling their function successfully. Although, once finished the printing and totally adhered to the base of the 3D printer the problem to solve is usually to take off the pieces of the base. The separation of the pieces or objects with great surface of adhesion to the base sometimes is really complicated.

Many users to peel off pieces use spatulas not designed specifically for 3D printing that can damage both the printed part and the base of the 3D printer. Ideal Jacobs, creator of BuildTak, after detecting this problem in 3D printing FDM / FFF, has been designing a spatula for several years based on his extensive experience in the world of 3D printing and especially in the design of 3D printing surfaces, which proves this new Spatula BuildTak.

This spatula has a rigid stainless steel blade with an ultra-thin front edge to be inserted between the part and the base of the 3D printer as easily as possible and without damage.

On the other hand, the handle of the BuildTak spatula is easy to grip and manufactured with anti-slip rubber designed to produce the advance movement at 0 ° with the own base of the 3D printer, unlike the non-specific spatulas in which the Incision with an angle between 5º and 45º with respect to the base of which causes damages in the piece and in the base.

BuildTak spatula is a professional tool that allows you to easily take off pieces of the 3D printer. The user must insert the blade of the BuildTak spatula carefully between the part and the base and push it by making enough pressure to get the piece off without risk of rupture and damage and making the minimum effort.

To make work easier for the user, the Buildtak spatula is available in two sizes. The small size has a 132 mm blade, while the large size has a 250 mm blade. In this way, it is possible to use the spatula that best suits the dimensions of the 3D printed part.

The blade of the BuildTak spatula should be inserted carefully between the part and the base and pushing the same making sufficient pressure to get the piece off without risk of rupture and damage and making the minimum effort.

Manufacturer BuildTak
Blade dimensions 132 mm
250 mm
Weight 150 g
HS Code 8203.2

Accessories

30 other products in the same category: