1
  • $options.id_post:
  • $options.slug:
  • https://filament2print.com/gb/blog/_.html
  • es
  • gb
  • pt
  • fr
  • Tribo Plus Filament

    New product

    11 Items

    49,95 €tax excl.
    60,44 €tax incl.

    Ask for information

    It is resistant to friction that offers a response to wear material.

    Tribo filament is a material resistant to friction up to 50 times more than conventional materials used for elements such as ABS in 3D printers as it offers a response to wear. Tribo filament is designed specifically for Tribology. Tribology is the science of friction, wear and lubrication taking place during contact between solid surfaces in motion. The characteristics of a good material as the filament Tribo are to reduce friction and wear to conserve and reduce energy, achieve faster and more precise movements, increase productivity and reduce maintenance. Tribology focuses on the study of three phenomena:

    1. Friction between two bodies in motion; Understood by friction resistance during sliding movement or rolling undergoing a solid to move over another with which it is in contact body.
    2. Wear as a natural effect of this phenomenon; Burnout is a process in which the surface layers of a solid break or detach from the surface. Wear may occur by fatigue, abrasion, erosion, corrosion, by rubbing, sliding, by impact, etc.
    3. Lubrication as a means to reduce wear; Lubrication involves the introduction of an intermediate layer of a foreign material between the moving surfaces.

    The design of parts or manufacturing prototypes are not detached from life assurance with Tribo filament. Tribo filament replaces the ABS to print bearings and gears 3D printers as it is designed to reduce friction, increase the wear resistance of parts and avoid lubrication.

    Filamento autolubricante tribo igus pf-180

    Fuente: www.igus.eu

    At the time of printing the Tribo Plus filament is the more complicated to print than the Tribo.  

    The Tribo Plus filament can be a bit more complicated to print on 3D FFF/FDM printers than the Tribo Filament. The hot bed should be at 100-130ºC of temperature and the extrusion temperature is 260-280ºC. Therefore only this filament is recommended for experienced users, unlike the Tribo filament which is suitable for all types of users. 

    It's advisable to use Buildtak so that the pieces do not tend to detach from the base (Warping effect). As for the temperature of the passenger compartment where it's going to be printed, it's recommended that it be controlled and that there be no drafts. Finally it's important that the 3D printer is in a well ventilated room. The material should not be heated above 300°C as it can form dangerous decomposition products.

    • Plastic Type: iglidur® | J260
    • Manufacturer: In Europe by igus®
    • Color: Yellow
    • Diameter: 1.75mm or 2.85 mm
    • Nozzle temperature: 260 to 280 °C
    • Bed temperature based printing: 100-130ºC
    • Quantity: 250 gr coil of very high quality
    • Fan layer: No
    • Print speed: ~ 20 mm/s
    • Print speed of the first layer: ~ 20 mm/s
    • Thickness: ~ 0.2 mm
    • Maximum absorption of moisture has 23ºC and 50% h.a: 0,3% Percentage of weight
    • Maximum water absorption: 0,4% Percentage of weight
    • Maximum temperature of long-term application: +120ºC
    • Maximum application temperature short-term: + 140ºC
    • Minimum temperature rating: -100ºC
    • Spool diameter: 200mm
    • Spool Width: 55mm
    • Inside hole diameter: 50 mm
    • Shipping Weight: 0.5Kg
    • HS Code: 3916.9
    • Smells and fumes: Yes. Print in a place with ventilation.

    Properties iglidur J260 - Tribo Plus

    The Tribo Plus filament also stands out for its chemical resistance mainly to diluted liquors, hydrocarbons and alcohols, as indicated in the following table:

    iglidur J260 Chemical resistance filament 3D printing

    Accessories

    1 other products in the same category: