1
  • $options.id_post:
  • $options.slug:
  • https://filament2print.com/gb/blog/_.html
  • es
  • gb
  • pt
  • fr
  • E3D Original Heater Cartridge

    New product

    47 Items

    9,45 €tax excl.
    11,43 €tax incl.

    Ask for information

    Heater Cartridge recommended for high printing temperatures, high performance and high durability.

    The Heater Cartridges are responsible for obtaining the desired temperature in the heater block depending on the material that the user uses. These Heater Cartridges are very durable and resistant to cable breakage by incorporating a meter of high quality cable with a 5cm high temperature resistant silicone coating against the cartridge. On the other hand, the Heater Cartridge has an interior with a high potency ceramic resistance, thus heating the block quickly and reaching high printing temperatures, something necessary to print materials such as Tritan-BluPrint or PC. Another feature of the ceramic part is the great precision it has to maintain the same temperature throughout the 3D printing time, which ensures a quality 3D printing without failures due to temperature variation in the HotEnd. The ceramic part is covered by a metal cartridge. Being this cartridge of high performance, resistant to the loss of the enamel, resistant to blows and great conductor of the heat detached by the ceramic part, taking advantage of all the heat that generates the resistance.

    Heater cartridge for 3D printer

    Image 1: Heater Cartridge

    In addition, E3D has High Precision Heater Cartridges to be able to print with total safety even the most demanding materials on the market. Thanks to them the HotEnd heats up faster, at a higher temperature and is able to keep the temperature completely stable.

    High Precision Heater Cartridges

    Imagn 2: High Precision Heater Cartridges. Source: E3D

     

    On the other hand the High Precision Heater Cartridges facilitate the exchange of the HotEnd gthanks to the Molex quick connector, avoiding the installation of the cables from the cartridge to the electronics every time a change is made. The High Precision Heater Cartridges are available in 12v 30w and 24v 30w.

    High Precision Heater Cartridge with Molex connector

    Image 3: High Precision Heater Cartridge with Molex connector. Source: E3D

    These Heating Cartridges are compatible with the HotEnd de E3D v4/v5/v6Volcano, Chimera, Cyclops and Kraken, as well as other HotEnds on the market. Users of 3D printers that don't use previous HotEnds can verify that their HotEnd is compatible with this Heater Cartridge by reading this product's usage tips and specifications to make sure the measurements, voltage, and power is adequate for the 3D printer.

    To find out if the Heater Cartridge is compatible with the 3D printer, check the resistance of the Heater Cartridge that the 3D printer currently has against the table below.

    Table use heater cartridge for 3D printer

    A deviation of the value of about 5w is accepted, if the difference is greater, it is not advisable to use these Heating Cartridges.

    • Model: Heater Cartridge.
    • Voltage: 12v/24v.
    • Power: 30w/40w.
    • Variants: 12v 30w / 12v 30w High Precision / 12v 40w / 24v 30w / 24v 30w High Precision / 24v 40w
    • Length: 21mm.
    • Diameter: 6mm.
    • Cable length: 1000mm.

    Accessories

    14 other products in the same category: