> >>XYZ Engineering Resin (DLP)
Resina Estándar XYZ (SLA) View larger

XYZ Engineering Resin (DLP)

XYZ Printing

This product could be delivered in a period exceeding the standard.

New product

139,67 €
139,67 €

Ask for information

Resins to manufacture precise parts in DLP technology and with certain advanced properties for  XYZ Nobel Superfine.

Add to wishlist

XYZ resins for 3D printing DLP technology have been developed for the XYZ Nobel Superfine printer and allow to achieve high levels of detail and accuracy, but at the same time have certain advanced properties.

Currently, rigid resin is available for DLP technology that is highly rigid and resistant to deformation, making it suitable for engineering prototypes.

Installing the bottle of resin is really simple and is done in just three steps: You must replace the cap, insert the bottle into the 3D printer and finally connect the tube. The material, color, and remaining resin level will automatically be detected and the tank will be automatically filled.

The package includes 2 bottles of 500ml, so the total amount is 1 liter.

If an UV curing unit of XYZ is available, it is necessary to select the power level 3 and the curing time 10. It is important to store the resin at a temperature of between 10 and 32 ° C to avoid deterioration thereof. In addition, you must have different tanks for each type of resin (material / color) to avoid printing failures.

Hide color variations (Hide color variations)
  1. Heating of this product is strictly prohibited. Photopolymer resins can generate vapors that can cause discomfort when subjected to high temperatures.
  2. Keep the product in a well-ventilated space out of the reach of children.
  3. Avoid contact of skin or eyes with uncured resin. If accidental contact occurs, immediately rinse the affected area with clean water.
  4. The uncured resin in the tank can solidify if it is exposed to sunlight before it is removed. Therefore, be careful when disposing of uncured resin and do not pour the material directly into the sink.
  5. After printing, any uncured resin on the surface of the printed object should be cleaned with alcohol.
Manufacturer XYZprinting
Technology DLP
Format Bottle of 500 ml (x2)
Operating temperature 18-28ºC
Printing temperature 10-32ºC
Printing resolutions -
Power level (XYZ cured) 3
Curing time 10
References Orange (RUTD3XUS00A)
Compatible printers Nobel Superfine DLP
HS Code 2916.1

30 other products in the same category:

Filament2Print © All rights reserved

DATIVIC S.L. CIF/VAT: ESB70460423

Pol. Ind. Porto do Molle. 7A. 36350 Nigran (Pontevedra - Spain)