"Traffic Purple" PLA Premium View larger

Traffic Purple PLA Premium


New product

27 Items

18,20 €
18,20 €

Ask for information

"Traffic Purple" PLA filament of very high quality manufactured in Europe by Fillamentum.

"Traffic Purple" Premium PLA filament (1.75mm or 2.85m) is a filament of very high quality made in Europe for 3D printing with "Traffic Purple" PLA Extrafill trade name of Fillamentum.

Spools of 750gr of "Traffic Purple" PLA Premium filament of Fillamentum can be printed easily in any FFF/FDM 3D printer. The PLA is one of the most widely used 3D printing today because it doesn´t release harmful gases and it is very easy to print with it since it is not essential to have hot printing base materials. If you are interested in learning more about this material you can read more on the link. The PLA (polylactic acid) is a biodegradable plastic derived from natural resources, in particular is obtained from the extracted starch from corn, sugar beet and wheat.

With "Traffic Purple" PLA Premium filament (1.75mm or 2,85mm) you will get brighter figures and at the same time the figures are rigid and resistant.

This PLA filament is a PREMIUM filament due to the high quality standards in which it is manufactured. It is manufactured by a European company (Czech Republic) that stands for the great experience in the field of extrusion of plastics for automotive, chemical and packaging, highlighting the strong commitment to research and development of new products. This is the case of the filaments Premium Fillamentum 3D printing.

"Traffic Purple" PLA Premium filament (1.75mm or 2,85mm) is manufactured by strict control throughout the entire manufacturing process. This PLA Premium filament ensures high accuracy of diameter dimensions such as one tolerance ± 0.05mm, with excellent roundness and without any chemical impurities that produce poor viscosity of the filament. This is further achieved by carrying out strict control throughout the manufacturing process using a raw material with high purity. In addition they offered a variety of colors according to RAL and Pantone reference of Premium PLA filament. By setting high standards of quality it ensures that at no time be color variations so you never have quality problems in the printed pieces in long series on your 3D printer.

In addition, the 750gr spools of "Traffic Purple" PLA Premium filament  manufactured by Fillamentum are perfectly rolled which prevents printing problems caused by overlap winding or filament itself together of the same coil occur.

In addition to all the points mentioned above, this filament PLA is considered in the market for 3D printing as a Premium because of its amazing packaging with a resealable bag pouch that protects it from moisture and UV rays and turn it inside a box.

Therefore, it is a Premium PLA filament high quality fully stabilized for excellent finishes with the highest reliability and ease of 3D printing.

The PLA filament is a stable, permanent, odorless polymer. PLA counterparties against ABS noteworthy that its softening temperature is 60ºC 100ºC front ABS.  You can not drill, paint or sanding as ABS but is a more stable and easier plastic print. If you want to achieve extraordinary surface finish in the PLA filament (1.75mm or 2.85 mm) using coating designed specifically for 3D printing you can find in the accessories category called XTC-3D. 

For higher yields of 3D printing it is advisable to cover the bed of the printer with Blue TapeMagigoo  or  3DLac, you can find them in the store fixtures.

In the usage tips tab you will find more interesting information for optimal results using Traffic Purple Premium filament on your 3D printer.

Impact strength (KJ/m2) 1.6
Elongation at break (%) 6
Tensile strength (MPa) 53
Tensile modulus (MPa) 3600
Flexural strength (MPa) 83
Flexural modulus (MPa) 3800
Softening temperature (ºC) 60
Biodegradable Biodegradable

3D printing with PLA is simpler and easier than with ABS. It is not necessary that the printer dock is hot, but if possible it is recommended that the base is approximately 50-60 ºC, to prevent any small sign of "warping" appears. The extruder temperature must be between 190 and 220 ºC depending on the colour and 3D printer used. If your printer has a fan nozzle is recommended that you enable it for best results In the article from our blog of 3D printing is explained about the main doubts of 3D printing with PLA and ABS.

If you need to print very thin and tall pieces, you will see that the PLA plastic does not give you enough time to harden each layer, so that the piece will be as if it had melted. To solve this problem we give a very simple advice, printed at the same time at least 2 pieces, and place them in separate base. So while the extruder is moved from one piece to another, the plastic has time to harden each layer in achieving a better result.

The adhesion of the first layer is key and probably the most important factors for goods prints. So you can use Blue TapeBuildTak, Magigoo or 3DLac.

It is also advisable to set the "raft" which is to create a first thick layer, and supports that will not suffer that contraction and on which is printed the piece. The disadvantage of using the "raft" is that this first layer will have a less smooth.
It is advisable to lower the density of "infill" parameter for the part to store less heat. As for the "brim" (the membrane that is created around the part) parameter is recommended never fit in greater thicknesses of 5mm to help the first layer does not come off.

As for the interior temperature where printed is recommended to be controlled and no drafts.

General information
Manufacturer Fillamentum (Czech Republic)
Material PLA
Format Spool of 0.75 kg or 2.5 kg
Density 1.24 g/cm3
Diameter of filament 1.75 or 2.85 mm
Diameter tolerance ±0,05 mm
Filament length ±251 m (Ø 1.75 mm-0.75Kg)
±838 m (Ø 1.75 mm-2.5Kg)
±95 m (Ø 2.85 mm-0.75Kg)
316 m (Ø 2.85 mm-2.5Kg)
Color "Traffic Purple"
RAL/Pantone RAL 4006 / P465
Print settings
Printing temperature 190-210ºC
Print bed temperature 40-50ºC
Chamber temperature Not necessary
Cooling fan Recommended
Recommended printing speed 30-40 mm/s
Mechanical properties
Izod impact strength (ASTM D256) 16 J/m
Charpy impact strength -
Elongation at break (ASTM D702) 6% 
Tensile strength (ASTM D702) 53 MPa 
Tensile Modulus (ASTM D702) 3600 MPa 
Flexural strength (ASTM D790) 83 MPa
Flexural modulus (ASTM D790) 3800 MPa
Surface hardness  -
Thermal properties
Softening temperature (ASTM E2092) 55-60ºC 
Melting temperature 145-160ºC
Specific properties
Transparency (ASTM D1003) 2.1%
Brightness value (ASTM D1003 for 20ºC) 90
Additional Information
HS Code 3916.9
Diameter coil (outer) 200 mm (0.75 kg spool)
300 mm (2.5 kg spool)
Diameter coil (inner hole) 55 mm (0.75 kg spool)
53 mm (2.5 kg spool)
Coil Width 50 mm (0.75 kg spool)
100 mm (2.5 kg spool) 

* The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the results and final properties with own tests. For more information you should consult the technical data sheet of the product.

30 other products in the same category: