20 Item Items
Warning: Last items in stock!
Red PLA Basic (1,75mm or 3mm) filament is manufactured in Europe for 3D printers. Spool 1kg(2.3lb) Red PLA Basic (1,75mm or 3mm) support multiple types of 3D printers. PLA is a biodegradable plastic that is obtained from natural resources, in particular is obtained from the extracted starch from corn, sugar beet and wheat.
Red PLA Basic (1,75mm or 3mm) is one of the most widely used 3D printing today because no apparent damaging gases because it is not necessary to have a 3D printer with hot bed base which makes it very easy to print materials with him. If you are interested in learning more about this material you can read more on this link.
Red PLA Basic (1,75mm or 3mm) is the easiest material 3D printers for print on FDM/FFF Technology. With Red PLA Basic (1,75mm or 3mm) you can get brighter figures than using the ABS while this is stiffer and stronger. In addition Red PLA Basic (1,75mm or 3mm) filament is a permanent, odourless polymer. The extrusion temperature to print with this Red PLA Basic (1,75mm or 3mm) must be between 190 and 220 ºC. In a tab usage tips you can view more interesting information for optimal results using Red PLA Basic (1,75mm or 3mm) on your 3D printer.
Can´t drill, paint or sanding as the ABS but is a more stable and easier to print plastic this. If you wish to obtain special surface finishes in Red PLA Basic (1,75mm or 3mm) use coating designed specifically for 3D printing you'll find in the accessories category called XTC-3D. For higher yields of 3D printing is advisable to cover the bed of the printer with Blue Tape, BuildTak, or 3DLac you can find in the store fixtures.