• $options.id_post:
  • $options.slug:
  • https://filament2print.com/gb/blog/_.html
  • es
  • gb
  • pt
  • fr
  • 3D printer Kit Mendel Max XL v6

    This product could be delivered in a period exceeding the standard.

    New product

    799,00 €tax excl.
    966,79 €tax incl.

    Ask for information

    Large print area and self-leveling system, that can print large objects. 

    The new Mendel Max XL v6 3D printer is designed to help you materialize your ideas. Its large printing area and precise extrusion system allow you to print easily from small objects to large objects.

    The Mendel Max XL v6 3D printer is the domestic printer with the highest print volume on the market with a print volume of 380x220x200 mm. It has a heated bed which allows printing with any thermoplastic filament such as ABS, PLA, PETG, CPE, Nylon, Polycarbonate, HIPS, PVA, LayWoo-3D, Lay-Brick, etc. It has a resolution that reaches up to 100 microns with a TFT screen of MKS that allows printing autonomously. The older this screen has an intelligent system with which you can recover a print interrupted by a power outage, something ideal to be quiet during 3D prints of many hours. Another advantage that the Mendel Max XL v6 presents and that further increases the enjoyment of its use, is the new filament end sensor. This sensor detects when the filament is finished, stopping printing immediately until the user re-feeds the extruder and resumes production from the screen.

    Mendel Max XL v6

    Image 1: Mendel Max XL v6


    The electronics consist of an Arduino Mega 2560 Original and a RAMPS 1.4 SB from Static Boards (RAMPS 1.4 improved for 3D printers), a great potential configuration that ensures an infallible operation, fast and free of overloads. All these components are protected inside a box with forced ventilation to maintain a stable and adequate temperature for proper operation.

    Electronic enclosure with forced ventilation

    Image 2: Electronic enclosure with forced ventilation


    The Mendel Max XL v6 3D printer has two possible extruder diameters: 1.75 mm and 2.85 mm:

    • The 1.75 mm extrusion system is formed by the new and powerful Bondtech BMG extruder and the E3D-Online HotEnd v6, a HotEnd widely used in 3D printing and used by large manufacturers for its high precision, smooth operation and easy maintenance. These qualities are repeated in the Bondtech BMG extruder, which can move any type of material, both rigid and flexible, without any problem thanks to its double pinion system. Its power is such that it can displace up to 8 kg of weight without loss of movement of the filament.
    • For the 2.85 mm extrusion system, the Mendel Max XL v6 uses a E3D-Online Titan extruder and a E3D-Online HotEnd v6. This configuration is perfect because E3D has developed these components to work together to obtain fast, accurate and accurate 3D prints. As with the 1.75 mm configuration, you can print both rigid materials (PLA, ABS, PETG, CPE, Nylon-Carbon Fibre CF15) and flexible (Flexfil TPU, FilaFlex TPE) without any concern.

    Bondtech BMG Extruder with E3D HotEnd v6

    Image 3: Bondtech BMG Extruder with E3D HotEnd v6


    The structural part of this 3D printer consists of a chassis of aluminum profiles 20x20 mm anodized in black joined together by pieces of 4 mm aluminium also lacquered in black. To ensure a stable temperature in the printing area, which is essential for using materials prone to warping, it is recommended to purchase the outer housing (extra). Another extra available for the Mendel Max XL v6 is the double extruder, which allows to make pieces in two colors or with different materials (rigid and flexible, base and support).

    Kit contains all the necessary elements so you can assemble and operate your own 3D Printer Mendel Max XL. [The electronics are preassembled and preconfigured, the power connector wiring, the extruder assembly and the cables of the axes XYZ (engine and Endstop) soldiers]. You can download the necessary software and manuals in the following link. The delivery time of the Mendel Max XL v6 3D printer ranges from 2 to 3 weeks maximum. 

    Size of filament: 1,75 mm or 2,85 mm
    Advises wash the plate between impressions and apply laca before each impression always out of the printer 3D. In case to apply the laca in the interior of the printer 3D will lose the guarantee.
    Better temperature of extrusion in PLA : 200-230°
    Better temperature of extrusion in ABS : 220-250°
    Filaments of compatible impression and tested: ABS, PLA, Nylon, Polycarbonate, HIPS, PVA, LayWoo-3D, Lay-Brick, etc.

    • Manufacturer: MakerGal in Spain

    • Dimensions and weight:
      Printer Dimensions: 620 x 550 x 540 mm
      Dim. printing area (X,Y,Z): 380 x 220 x 200 mm (1 extruder) / 280 x 220 x 200 mm (double extruder)
      Box dimensions: 700 x 600 x 600 mm
      Box weight: 17 kg

    • Resolution:
      The Mendel Max XL is equipped with a fuser E3D v6 that exchanges the nozzles,the smallest nozzle diameter greater.
      Standard nozzle is installed to 0.4 mm it can get layers to a maximum of 400 microns and a minimum of 100.

    • Accelerations and speeds:
      X axis acceleration: 1000 mm / s2
      Axis acceleration and 500 mm / s2
      Z axis acceleration: 100 mm / s2
      Recommended speed: 40 - 60 mm / s
      Recommended Maximum speed: 100-120 mm / s

    • Electronics:
      Arduino Mega 2560 Compatible
      Ramps 1.4 Static Boards
      Drivers StepStick to 1.2 Amps
      TFT MKS with SD Card Reader
      Heated silicone bed 220V
      Kit activation heated base mediente relay
      Source 12V 33A
      NEMA motors 17 for all axes.<br
      End of filament sensor
      70 Oz axis and extruders
      58 OZ axes Z and X
      Connector and power switch.

    • Mechanics:
      Aluminium profile 20x20 anodized black
      Holders of the X and Z axes in 4 mm aluminum
      Parts printed in PLA
      Flexible Couplings for Z axis
      Rods 10 mm for the X and Z axes and rod 8 for Y.
      Threaded rod 5 mm z axis with nuts bronze and system antibackslahs.
      Linear Bearings LM type for all axes.
      Straps and pulleys GT2 for X and Y axes
      Base print crystal 4 mm.
      Extrusion System Direct.
      Dual extrusion.

    • Hot End / Fusor:
      Extruder Bondtech BMG (1,75 mm) / Titan extruder (2,85 mm)
      E3d V6 - all metal extruder
      Nozzle 0.4 mm
      Filament 1.75 mm or 2.85 mm
      Cooling System incorporated.

    • Firmware:
      Recommended Software Repitier Host + SLIC3R
      Supported files STL OBJ
      Compatible with Windows Linux and Mac

    • Materials accepted:
      ABS, PLA, Nylon, Polycarbonate, HIPS, PVA, Laywood, Laybrick etc.

    • Box Contents:
      3D printer kit to assemble

    • Kit does not include:
      Power cable
      Glass and tweezers
      SD card


    6 other products in the same category: