16 Item Items
Warning: Last items in stock!
Natural Smartfil HiPS filament 1.75mm or 2,85mm (Polystyrene) (High Impact Polystyrene) is a thermoplastic obtained by polymerizing high impact resistance. It is known as "High Impact Polystyrene" and used as support material ABS or PLA impressions. The Natural Smartfil HiPS filament 1.75mm or 2,85mm (Polystyrene) is 20% more impact resistant than the ABS itself, with greater flexibility and reduced warping.
Although most of its mechanical and physical properties (stiffness, tensile strength and impact resistance, thermal stability, ...) are similar to those of ABS, there is a feature that makes it different to everyone else who is their solubility in D -Limonene, allowing to make unworkable forms a soluble support material and will be realized once the piece in D-Limonene and HIPS immerse disappears, leaving the piece without any support material with a high surface quality.
It is indicated for light and high-quality technical parts (Due to the high resolution printing) material. Natural Smartfil HiPS filament 1.75mm or 2,85mm (Polystyrene) is a bit lighter than the ABS. The temperature optimum print is 240 °C. When printed at this temperature it is necessary that the temperature of 80-100 ºC bed is to minimize the warping effect.
Besides the Natural Smartfil HiPS filament (1.75mm or 2,85mm) has a very good seal so it is ideal for containing liquids without leakage. This property is due to the high thermal inertia of own Smartfil HiPS which enables a very good adhesion between layers print.
Natural Smartfil HiPS filament 1.75mm or 2,85mm (Polystyrene) is resistant to oils, fats and alkalis but not fuel. As for his post-processing and finishing it can be chrome, paint, glue and sand. HIPS supports evil UV rays, so you long exposure to the sun it discolor and become brittle. If you need a material that resists well UV light rays you must choose the ASA filament. HIPS (Polystyrene) has low electrical conductivity, which can be used as an electrical insulator. Its properties typically used in high-frequency. As for the softening temperature HIPS it supports up to 96 °C.