1
  • $options.id_post:
  • $options.slug:
  • https://filament2print.com/gb/blog/_.html
  • es
  • gb
  • pt
  • fr
  • Black Smartfil HiPS (Polystyrene)

    Smart Materials

    New product

    18 Items

    18,95 €tax excl.
    22,93 €tax incl.

    Ask for information

    Black filament with high impact resistance and can be used as support material.

    Black Smartfil HiPS filament 1.75mm or 2,85mm (Polystyrene) (High Impact Polystyrene) is a thermoplastic obtained by polymerizing high impact resistance. It is known as "High Impact Polystyrene" and used as support material ABS or PLA impressions. The Black Smartfil HiPS filament 1.75mm or 2,85mm (Polystyrene) is 20% more impact resistant than the ABS itself, with greater flexibility and reduced warping.

    Although most of its mechanical and physical properties (stiffness, tensile strength and impact resistance, thermal stability, ...) are similar to those of ABS, there is a feature that makes it different to everyone else who is their solubility in D -Limonene, allowing to make unworkable forms a soluble support material and will be realized once the piece in D-Limonene and HIPS immerse disappears, leaving the piece without any support material with a high surface quality.

    It is indicated for light and high-quality technical parts (Due to the high resolution printing) material. Black Smartfil HiPS filament 1.75mm or 2,85mm (Polystyrene) is a bit lighter than the ABS. The temperature optimum print is 240 °C. When printed at this temperature it is necessary that the temperature of 80-100 ºC bed is to minimize the warping effect.

    Besides the Black Smartfil HiPS filament (1.75mm or 2,85mm) has a very good seal so it is ideal for containing liquids without leakage. This property is due to the high thermal inertia of  own Smartfil HiPS which enables a very good adhesion between layers print.

    Black Smartfil HiPS filament 1.75mm or 2,85mm (Polystyrene) is resistant to oils, fats and alkalis but not fuel. As for his post-processing and finishing it can be chrome, paint, glue and sand. HIPS supports evil UV rays, so you long exposure to the sun it discolor and become brittle. If you need a material that resists well UV light rays you must choose the ASA filament. HIPS (Polystyrene) has low electrical conductivity, which can be used as an electrical insulator. Its properties typically used in high-frequency. As for the softening temperature HIPS it supports up to 96 °C.

    Hips_Smartfil_Filament2print

    Impact strength (KJ/m2) 14
    Tensile strength (MPa) 16
    Tensile modulus (MPa) 1750
    Flexural strength (MPa) 38
    Flexural modulus (MPa) 1950
    Surface hardness 7
    Softening temperature (ºC) 100
    Electric insulator Electricity insulator
    Sealing Sealing
    Lightweight Lightweight
    Solubility Solubility
    Chemical resistance Chemical resistance

    It´s a material with properties very similar to those of ABS that printing is not especially difficult to print. Nozzle temperature should be between 230 and 240 °C. As in the case of ABS, the need to use a hot bed at a temperature of about 80-100 °C. Once the printing must wait for the piece cool before removing to prevent any deformation may occur due to the printing temperature. It is also advisable to use BuildTak or Dimafix to prevent warping effect on printing.

    General information
    Manufacturer Smart Materials (Spain)
    Material HiPS (High Impact Polystyrene)
    Format Pack of 50 g
    Spool of 0.75 kg
    Density 1.05 g/cm3
    Diameter of filament 1.75 or 2.85 mm
    Diameter tolerance ±0.03 mm (1.75 mm)
    ±0.05 mm (2.85 mm)
    Filament length ±297 m (Ø 1.75 mm-0.75Kg)
    ±112 m (Ø 2.85 mm-0.75Kg)
    Color "True Black"
    RAL/Pantone -
    Print settings
    Printing temperature ±240 ºC
    Print bed temperature 80-100ºC
    Chamber temperature Not necessary
    Cooling fan Not recommended
    Mechanical properties
    Izod impact strength (ASTM D256) 14 KJ/m2
    Charpy impact strength (ISO 179) 12 KJ/m2
    Charpy impact strength -
    Tensile strength (ASTM D638) 16 MPa
    Tensile Modulus (ASTM D638) 1750 MPa
    Flexural strength (ISO 178) 38 MPa
    Flexural modulus 1950 MPa
    Surface hardness (ISO 2019-1) Rockwell 70
    Thermal properties
    Softening temperature (ISO 306) 100ºC
    Melting temperature -
    Specific properties
    Transparency  Opaque
    Additional Information
    HS Code 3916.9
    Diameter coil (outer) 200 mm 
    Diameter coil (inner hole) 55 mm 
    Coil Width 70 mm 


    * The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the results and final properties with own tests. For more information you should consult the technical data sheet of the product.

    8 other products in the same category: