• $options.id_post:
  • $options.slug:
  • https://filament2print.com/gb/blog/_.html
  • es
  • gb
  • pt
  • fr
  • Aqua Marina FilaFlex


    New product

    10 Items

    27,90 €tax excl.
    33,76 €tax incl.

    Ask for information

    Most elastic filament of 3D printing market, reaching 700% stretch, in aqua marina colour.

    Aqua Marina Filaflex is the most elastic filament market, reaching 700% elongation at break. Aqua Marina Filaflex filament is a TPE (thermoplastic elastomer) based in polyurethane filament and certain additives. Filaflex filament has a high elasticity, a high coefficient of friction and smoother making it a flexible material with excellent properties for 3D printing.

    FilaFlex has excellent binding properties with PLA, ABS, HIPS, Nylon and almost any media. This allows the creation of composite parts that combine hard and soft materials in a single print. Besides the Aqua Marina FilaFlex filament it is resistant to gasoline, solvents and acetone. FilaFlex is not toxic but is not approved for medical or food use. FilaFlex not release odors, it is completely odorless and does not produce toxic gases.

    Furthermore the Aqua Marina FilaFlex filament supports most 3D printers on the market. It has been tested in Makerbot Replicator 3D printers 1 and 2, RepRap Prusa i2 - i3, RepRap BCN, BQ Witbox, Sharebot, Ultimaker 1 & 2, PrinterBot, Mendel and Lulzbot Max. In the case of not being compatible with a 3D printer, Recreus has risen plans to adapt the extruder to optimize the thrust of flexible filament. In the case of not being compatible with a 3D printer, Recreus has designed a specific extruder for flexible and elastic materials, the Recreus Extruder V3.

    If you want a flexible material but also with some resistance pick the Soft-Flex PLA filament.

    It is very advisable to read the following article that will see major challenges confronting the FilaFlex when printing as well as solutions and usage tips. The use of 3D printers with direct drive extruder is recommended (Recreus Extruder V3), but FilaFlex can be used in 3D printers Bowden (indirect drive) at low printing speeds but is not recommended due to the long distance between the hotend and stepper motor. If the Filaflex filament is 2.85 mm it is not so easily occurs the problem of filament unguided in the extruder itself as in the case of FilaFlex of 1.75mm.

    When you try to print for the first time the filament FilaFlex is recommended to start with low speeds (25 mm/s) and high temperatures (245 °C). If you don´t have the Recreus extruder or hotend optimized for elastic filaments must use retraction distance 1.5mm, a speed of 30 mm/s, and increase the flow if the filament is intermittent extrusion (between 105-110%). In addition they should reduce the pressure lever arm presses the filament on the motor pulley to prevent the filament choke or jams.

    As you gain experience you can increase the speed and lower the temperature in order to achieve high quality prints. You must use the fan layer because it is liquid enough to melt. As for the extrusion height does not affect the adhesion between layers (Ideal between 0.1 and 0.25 mm). Hot or base, or the use of BuildTak, 3DLac,  Kapton tape or Blue Tape is not needed,  for the Filaflex to adhere to bed.

    The manufacturer (Recreus 3D) makes printing profiles (CURA, SLIC3R, CRAFTWARE, KISSLICER or SIMPLIFY3D ) FilaFlex you can download here.

    You can download the manufacturer's safety data sheet, and the technical data sheet in the download tab.

    General information
    ManufacturingRecreus 3D (Spain)
    MaterialTPE (Thermoplastic Elastomer)
    FormatPack of 50g
    Spool of 0.5kg
    Density1.12 g/cm3
    Diameter of filament 1.75 or 2.85 mm
    Diameter tolerance ±0,05 mm
    Filament length ±185 m (Ø 1.75mm-0.5kg)
    ±70 m (Ø 2.85mm-0.5kg)
    ColorAqua Marina
    Print settings
    Printing temperature 215-250ºC
    Print bed temperature Not necessary
    Chamber temperature Not necessary
    Cooling fan Recommended
    Recommended printing speed 20-60 mm/s
    Minimum nozzle diameter0.4 mm or more
    Layer height0.2 mm
    Retraction3.5-6.5 mm (20-120 mm/s)
    Mechanical properties
    Izod impact strength-
    Charpy impact strength -
    Elongation at break (DIN 53504-S2)600% 
    Tensile strength (DIN 53504-S2)45 MPa 
    Tensile Modulus-
    Flexural strength -
    Flexural modulus-
    Surface hardness Shore 82A
    Abrasion resistance23 mm3
    Thermal properties
    Softening temperature (ASTM E2092)105ºC 
    Melting temperature 220ºC
    Specific properties
    Transparency -
    Flammability classification UL94HB
    Resistant to solvents, acetone and fuelYes
    Additional Information
    HS Code3916.9
    Diameter coil (outer) 200 mm 
    Diameter coil (inner hole) 53 mm 
    Coil width 50 mm 

    * The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the results and final properties with own tests. For more information you should consult the technical data sheet of the product.

    20 other products in the same category: