> >>Heat shrink sleeve (328 pcs)
Heat shrink sleeve (328 pcs) View larger

Heat shrink sleeve (328 pcs)

HEAT-SHRINK-SLEEVE-ASO

New product

27 Items

5,95 €
5,95 €

Ask for information

The heat shrink tube is a wrapper to isolate and strengthen mainly the electronics cables.

Add to wishlist

The heat-shrinkable tube is a very widespread use in the field of electronics and 3D printing to isolate and strengthen mainly the electronics cables. When it is necessary to make the connection of two cables by welding of tin, the wire must not be visible, so it is necessary to isolate the environment to avoid, mainly, short circuits. The conventional solution is to use electrical tape around the area, but the best and most professional solution is to use a heat shrink sleeve.

Heat shrink sleeve

Image 1: Heat shrink sleeve

 

The mode of use is very simple, a piece of heat shrink tubing of the correct size is inserted before welding the electric wires, once joined, the tube is placed in the desired area and heat is applied (with a heat gun, a lighter or with the own tinner) so that it contracts until it is completely attached to the electric wire. With this, apart from isolating the area perfectly, the installation time is reduced in comparison with the insulating tape. The advantage of having 8 different sizes of shrink sleeves and not a continuous tube of 1 m or more, is that it facilitates the maximum placement in the desired area without losing time in having to cut it, as for example to join the layer fan or the heater cartridge with the cables of the electronic board.

You must choose the shrink sleeve that best suits the area you want to isolate and protect.

Quantity 328 pieces
Package content x120 1x40 mm
x60 2x40 mm
x32 3x40 mm
x32 4x40 mm
x32 6x40 mm
x20 8x80 mm
x16 10x80 mm
x16 14x80 mm
HS Code 8536.3

30 other products in the same category:

Filament2Print © All rights reserved

DATIVIC S.L. CIF/VAT: ESB70460423

Pol. Ind. Porto do Molle. 7A. 36350 Nigran (Pontevedra - Spain)