Anycubic Photon P1 - LCD 3D Printer

The Anycubic Photon P1 is a professional resin 3D printer engineered for environments where precision, stability, and reliability are essential. Featuring advanced MSLA architecture, a 14K LCD screen, a dual-color and dual-material printing system, and industrial-grade mechanics, it stands out as one of the best high-precision resin 3D printers for professional use, technical prototyping, and end-use part production.

With a 6.5L build volume (223 × 126 × 230 mm) and an architecture optimized for over 1,000 consecutive cycles, it ensures stable, repeatable, and consistent production—even in demanding engineering, jewelry, and digital dentistry applications.

14K MSLA 3D Printer with Extreme Resolution and Professional Surface Finish

Equipped with a 10.1-inch 14K monochrome LCD screen, the Anycubic Photon P1 achieves an outstanding XY resolution of 16.8 × 24.8 microns, enabling the reproduction of ultra-fine details, smooth surfaces, and complex geometries with exceptional fidelity. This high-resolution resin 3D printer is specially optimized for miniatures, collectible figures, jewelry, digital dentistry, technical prototypes, and engineering models where dimensional accuracy is critical.

The LighTurbo 4.0 optical system, featuring an aspherical Fresnel lens, full-screen calibration, collimation below 2°, and an 8 mm copper cooling system, delivers over 92% light uniformity and stable output. The result is a professional MSLA 3D printer capable of producing perfectly defined layers, sharp edges, and consistent curing across the entire build surface.

Advanced Compatibility with High-Viscosity Resins up to 8000 cps

The Photon P1 stands apart from conventional MSLA printers thanks to its ability to process high-viscosity resins up to 8000 cps, including dental resins, high-detail model resins, flexible resins, transparent resins, high-strength resins, and engineering materials.

The 1000 ml resin vat with dynamic temperature control automatically adjusts between 20 °C and 40 °C, optimizing material flow, resin refill, and curing from the very first layer—boosting success rates even with ultra-high-viscosity technical materials.

Resin 3D Printer with Dual-Color and Dual-Material System

The Anycubic Photon P1 integrates a simultaneous dual-color and dual-material printing platform, designed to optimize production times and reduce premium resin consumption in small models. This functionality is enabled through the Dual Material Print Kit, available as an optional accessory, allowing users to adapt the configuration to each production requirement.

The system enables the production of complex models in a single run, managing independent parameters for each vat and material. This eliminates manual material changes, reduces waste, and improves workflow efficiency in dental applications, bi-component prototypes, and advanced technical parts.

Wave Release Technology for Enhanced Print Stability

The Wave Release Technology introduces micro-airflows between the build platform and the resin during lift movements, reducing separation force by up to 60% compared to conventional NFEP films. This minimizes required vertical travel, enhances structural stability, and increases overall print success rates.

The result is sharper edges, improved dimensional accuracy, and lower resin consumption, reinforcing the Photon P1 as a reliable resin 3D printer for professional production.

Industrial-Grade Mechanics and High-Precision Repeatability

The structure integrates an industrial-grade ball screw and precision linear rails capable of maintaining Z-axis repeatability of ±0.01 mm over thousands of cycles. This vibration-free solid architecture ensures tolerances comparable to the thickness of a human hair.

The high-flatness machined steel build platform enhances initial adhesion and maintains stability even with high-viscosity technical resins.

Intelligent Printing Assistant 3.0 and Advanced Auto-Leveling

The Intelligent Printing Assistant 3.0 system automates full process monitoring. The Pre-Print Leveling Self-Check verifies proper installation before every print, while the 3.0 leveling system eliminates manual adjustments.

It also integrates Dynamic Release 3.0, which monitors layer separation force in real time, and Light-Off Compensation 3.0, which calculates resin return to optimize exposure. In addition, it features AI-powered intelligent inspection for detecting build platform installation, base layer separation, resin level, and debris.

Professional Workflow Optimized for Production

It includes quick-release systems for both the build platform and resin vat, enabling changes in seconds. The drip-hanging system reduces material waste, the continuously opening hinged lid improves ergonomics, and ≤45 dB silent operation allows use in offices and laboratories.

The Air Pure 2.0 system eliminates odors during printing, while the integrated camera with AI monitoring enables remote supervision and early error detection.

Professional Ecosystem and Advanced Software

Compatible with Photon Workshop 4.0, it offers one-click intelligent slicing, preloaded resin parameters, advanced AI-assisted automatic support generation, custom support painting, Wi-Fi and Ethernet connectivity with isolated LAN mode, and remote monitoring via app.

Anycubic Photon P1: Advanced Resin 3D Printer for Precision and Production

With true 14K resolution, 8000 cps compatibility, optional dual-material system, Wave Release Technology, and industrial ball screw mechanics, the Anycubic Photon P1 positions itself as a high-performance professional resin 3D printer for studios, workshops, dental labs, and advanced technical production.