Display Nav Left

Language:

Accelerometer cable for Elegoo Neptune Series

Compatibility: Neptune 4 Plus

Cantidad:

1.00 €

Confirmar

Compare

You must be logged in to manage your wishlist.

Accelerometer cable for Elegoo Neptune Series

Name: Accelerometer cable for Elegoo Neptune Series
Brand: Elegoo
SKU: ELEG-NEP-ACCELINE
Price: 1.00 EUR
Availability: InStock

Ref.: ELEG-NEP-ACCELINE-4PLUS

1.00 €

Tax excl.

Compatibility: Neptune 4 Plus

Volume discounts

Buy 5 units

Save 5%

4.75 € Tax excl. Unit price 0.95 € 1.00 €

Quantity

In stock 0 units available for immediate shipping.
units available for shipping in 15 - 21 days Available for shipment within 15 - 21 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Wednesday 10 June - Thursday 18 June

Returns

Ask about this product

The accelerometer cable for ELEGOO Neptune 4 series 3D printers is the harness that connects the acceleration sensor (accelerometer) to the mainboard or the printer’s acceleration module. This cable is mainly used in models such as the Neptune 4 Plus and Neptune 4 Max, which incorporate acceleration sensors for advanced features like resonance calibration and input shaping, improving print quality by reducing vibration-related artifacts.

Unlike power or standard signal cables, the accelerometer cable transmits sensor data to the printer’s control system, allowing the firmware to interpret axis vibrations during high-speed movements. A properly functioning accelerometer cable is essential for these advanced features to operate correctly and for obtaining accurate vibration measurements that feed motion optimization algorithms.

This cable is designed to integrate without modifying the printer’s original wiring harness and usually includes standard connectors (such as 6-pin connectors on some models). Since it is only required on printers equipped with a physical accelerometer, replacement parts or accelerometer kits often include this specific cable to simplify replacement or repair when the original cable is damaged or disconnected.

General information
Manufacturer	Elegoo

Other
HS Code	8477.9

Avoid mechanical stress on the cable during axis movement, as the accelerometer operates in areas with constant vibration and motion.
Ensure the cable does not interfere with the toolhead or bed travel path, maintaining a clean installation with no snag points.
Do not bend the cable in tight angles, especially near the sensor connection, to prevent internal conductor damage.
Verify proper connection at both ends before performing input shaping calibration, as poor connections invalidate measurements.
Keep the cable away from heat sources, such as the hotend or heater block, to prevent insulation degradation.
Inspect the cable if vibration calibration errors appear, such as inconsistent readings or accelerometer detection failures.
Do not handle the sensor or cable while the printer is powered on, to avoid damage to the control board or accelerometer.
Secure the cable properly with guides or clips, reducing flex fatigue during high-speed printing cycles.
Periodically inspect external insulation, detecting cuts or wear caused by friction with moving structures.
Replace the cable if intermittent calibration failures or accelerometer signal loss occur, after ruling out the sensor or mainboard.