Display Nav Left

Language:

Heating cartridge for Elegoo Neptune

Compatibility: Neptune 4/Neptune 4 Pro

Cantidad:

1.25 €

Confirmar

Compare

You must be logged in to manage your wishlist.

Heating cartridge for Elegoo Neptune

Name: Heating cartridge for Elegoo Neptune
Brand: Elegoo
SKU: ELEG-HEATER-NEP
Price: 1.25 EUR
Availability: InStock

Ref.: ELEG-HEATER-NEP-4.4PRO

1.25 €

Tax excl.

Compatibility: Neptune 4/Neptune 4 Pro

Volume discounts

Buy 5 units

Save 5%

5.94 € Tax excl. Unit price 1.19 € 1.25 €

Quantity

In stock 0 units available for immediate shipping.
units available for shipping in 15 - 21 days Available for shipment within 15 - 21 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Tuesday 9 June - Wednesday 17 June

Returns

Ask about this product

The heating cartridge is an essential component of the hotend in Neptune 4 series 3D printers, providing the necessary heat to melt filament and ensure stable, controlled extrusion across all models in the range.

For Neptune 4 series variants, the original heating cartridges efficiently reach and maintain high printing temperatures. This rated power provides rapid and uniform heating of the extruder block, optimizing material flow and helping to prevent thermal fluctuations during long prints.

The cartridge is housed in a closed stainless steel metal sleeve capable of withstanding repeated thermal cycles without significant degradation. This robust design enhances component durability and reduces the risk of premature failure even under intensive use, positively impacting consistent print quality. Another key aspect is its compatibility with the original hotend of the Neptune 4 series. Replacement heating cartridges are designed to integrate easily with the hotend’s electrical connections and mounts, allowing straightforward replacement without complex modifications.

Heating cartridges are also available in compatible versions for other series variants, enabling separate spare stock for each model. In all cases, installation requires connecting the standard connector (e.g., XH2.54) to the hotend harness and securing the heating element in the thermal block, ensuring proper thermal contact for efficient heat transfer.

The cartridge’s thermal performance directly affects print quality, as stable temperatures in the melt zone promote uniform filament flow and reduce common issues such as warping, stringing, or layer inconsistencies. For this reason, using a high-quality, well-maintained heating cartridge is essential to maintain extrusion system reliability in all Neptune 4 series printers.

General information
Manufacturer	Elegoo

Other
HS Code	8477.9

Always check voltage compatibility before installation (typically 24V), avoiding irreversible damage to the control electronics.
Do not handle the heater cartridge while the printer is connected to mains power, as it may cause electric shock or short-circuit risk.
Ensure full and firm insertion into the heater block, guaranteeing efficient and stable heat transfer.
Apply thermal paste only if specified by the manufacturer, avoiding excess that could affect electrical insulation.
Periodically inspect the wiring condition, especially in areas near the hotend where high temperatures and continuous movement occur.
Avoid sharp bends in the cartridge wires, as they may cause internal breaks or intermittent heating failures.
Perform PID calibration after replacing the cartridge, to stabilize hotend thermal control.
Check thermal contact with the heater block, as poor fit may trigger errors such as “heating not reaching target” or similar.
Do not exceed the system’s recommended maximum hotend temperatures, to prevent premature degradation of the cartridge or heater block.
Replace the cartridge if intermittent heating failures or abnormal temperature rise times occur, after first ruling out thermistor and wiring issues.